USER GUIDE
- Jensen User Manuals
- Pelouze Ps20dl Manual
- Download Pelouze User Manuals Ps20dl Manual Free
- Download Pelouze User Manuals Ps20dl Manual Instructions
- Audiovox User Manuals
- Software User Manuals
DYMO by Pelouze Downloadable Postal Scale
PELOUZE 4040 MANUAL EPUB DOWNLOAD - Digital Receiving Scale Certificate of Calibration pdf. But I have no user manual or connector. Browse Pelouze Dymo lb. Digital Shipping Scale owner’s manuals, user guides, instructional help documents & operating information to learn more. I need user manual for the Pelouze Model PE5. OPERATOR’S MANUAL ™ Envelopes/Small Packages Please take a few minutes to read this Operator’s manual so that you can become acquainted with the proper usage and special features of your PELOUZE® DIGITAL SCALE. PS2R1-P 32 oz./1000 g capacity.
Your new Downloadable Postal Scale
|
|
weighs items up to 20 pounds (9 kg) in
|
Power
|
0.1 ounce (2 g) increments. This document
|
|
provides instructions for using the scale.
|
Enter
|
Setting Up the Scale
The scale is powered through the included power adapter. Optionally, the scale can be powered by six AAA batteries.
Unpacking the Scale
The scale comes with a serial cable for connecting the scale to your computer.
To unpack the scale
1.Unpack the scale.
2.Set the scale on a firm, flat surface.
3.Plug the RJ11 end of the cable into the RJ11 connector on the back of the scale.
4.Plug the other end of the cable into an available serial port on your computer.
!If your computer does not have a serial port, you can connect to a USB port using a serial to USB adapter.
Connecting the Power
The scale can be powered through the included power adapter or by six AAA batteries.
To connect the power adapter
1.Plug the power adapter into the back of the scale.
2.Plug the other end of the power adapter into a power outlet.
To insert the battery
1. Disconnect the power adapter from the scale and the power outlet.
2. Turn the scale over.
3. Remove the battery compartment cover.
4. Insert six AAA batteries into the battery compartment as shown.
5.Replace the battery compartment cover.
! Remove the batteries if the scale will not be used for a long period of time.
Turning on the Power
When using batteries to power the scale, the scale automatically turns off after two minutes of inactivity.
To turn the scale on
♦ Press the Power button on the front of the scale to turn the scale on and off.
When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing items. The display shows 88 88.8 for a few seconds and then 00 00.0 when ready.
Downloading Postal Rates
You can use your scale to calculate the postage amount for an item. You must download the latest postal rates to your scale before you can use your scale to calculate postage. For information on how to download the latest postal rates to your scale, visit the DYMO Web site, www.dymo.com/scaledownload.
Using the Scale
You can use the scale to determine the weight of an item and to calculate the postage amount for an item.
Weighing an Item
Always wait for 00 00.0 to display before placing an item on the scale platform. After placing an item on the scale, wait for several seconds for the weight to appear.
To weigh an item
♦Place an item on the scale platform.
♦Lift the top center part of the scale platform to a 90-degree position and place large envelopes in an upright position on the platform.
Using the Tare Feature
You can weigh small items or items that cannot be easily placed on the scale platform by placing the items in a container and using the Tare button to eliminate the weight of the container.
! Pressing the Tare button always returns the scale to zero.
To use the Tare feature
1.Place an empty container on the platform.
2.When the scale is ready, press the Tare (0) button. The display is set to zero.
3.Place the items to be weighed in the container.
4.After removing the container, press Tare to reset the scale to zero.
Using the Hold Feature
When an item being weighed extends over the front of the scale and you cannot see the display, you can freeze the display so that the weight is still displayed after removing the item.
To use the Hold feature
1.Press the Hold button. Hold flashes in the display.
2.Place the item on the scale platform.
3.After a few seconds, the display shows Hold without flashing and the scale makes a beeping noise.
4.Remove the item from the scale.
The weight continues to be displayed.
5.Press Hold to reset the scale to zero.
Changing the Units of Measure
Your scale can display weight in English (pounds) or metric (kilograms) units. The default unit of measure is English.
To change the units of measure
♦ Press the Kg/Lb (7) button to toggle between English and metric units.
Calculating the Postage Amount for an Item
Your scale can calculate the postage amount for USPS, UPS, and FedEx.
! Airborne/DHL rates shown are no longer valid.
Calculating the USPS Postage Amount for an item
Your scale can calculate the USPS postage amount for an item, including rates for Certified Mail, Registered Mail, Delivery Confirmation, and Return Receipt. Your scale can also calculate the USPS postage amount for First-Class Mail International up to four pounds to Mexico and Canada.
! The scale does not calculate postage amounts for Express Mail zones, or for shapebased First-Class Mail or International Mail. The scale calculates Parcel Post Inter-BMC/ASF rates only; the scale does not calculate Parcel Post Intra-BMC/ASF rates.
To calculate the USPS postage amount for an item
1.Place the item on the scale platform.
2.Press the Carrier button until the indicator arrow points to USPS.
3.Press the Calculate rate button.
4.If DEST ZIP is displayed, enter the ZIP Code that you are mailing to, and then press Enter.
5.Press the or button until the service you want to use appears in the lower-right of the display.
The postage amount appears in the lower-left of the display.
! Press the Clear/Esc button at any time to go back and change your selections.
To calculate the Insurance, COD, or Registered Mail postage amount for an item
1.Calculate the USPS postage amount for the item.
2.Press Insurance (1), COD (2), or Registered (4).
3.Enter a value for the item, and then press Enter.
The postage amount appears in the lower-left of the display.
To calculate the Return Receipt, Certified Mail, or Delivery Confirmation postage amount
1.Calculate the postage amount for the item.
2.Press Return Rec (3), Certified (5), or Confirmation (6).
The postage amount appears in the lower-left of the display.
!Return Receipt is only available in combination with Registered Mail.
To calculate the postage amount for International Mail to Mexico or Canada
!The scale does not calculate the postage amount for shape-based International Mail.
1.Place the item on the scale platform.
2.Press the Carrier button until the indicator arrow points to USPS.
3.Press the Calculate rate button.
4.If DEST ZIP is displayed, press Enter.
5.Press Mexico (8) or Canada (9).
Jensen User Manuals
The postage amount appears in the lower-left of the display.
Calculating the UPS and FedEx Postage Amount for an Item
Your scale can calculate the UPS and FedEx postage amount for an item, including rates for UPS and FedEx with Insurance and COD. The scale does not calculate fuel surcharges when calculating the postage amount
! FedEx Home Delivery is the only residential rate supported for FedEx.
To calculate the postage amount for an item
1.Place the item on the scale platform.
2.Press the Carrier button until the indicator arrow points to the carrier you want to use.
3.Press the Calculate rate button.
4.Enter the ZIP Code that you are mailing to, and then press Enter.
5.Press the or button until the service you want to use appears in the top-left of the display, and then press Enter.
6.Press the or button to select LTR, if you are mailing a letter or PKG, if you are mailing a package, and then press Enter.
7.Press the or button to select COMM, if you are mailing to a business, or RES, if you are mailing to a residence, and then press Enter.
The postage amount appears in the bottom-left of the display.
! Press the Clear/Esc button at any time to go back and change your selections.
To calculate the Insurance or COD postage amount for an item
1.Calculate the FedEx or UPS postage amount for the item.
2.Press Insurance (1) or COD (2).
3.Enter a value for the item, and then press Enter.
The postage amount appears in the lower-left of the display.
Comparing Rates for Different Carriers
You can calculate the postage amount for an item, and then view the postage amount for the same type of service for each carrier.
To compare rates for different carriers
1.Calculate the postage amount for the item with the service you want to use.
2.Press the Carrier button to toggle between carriers.
The scale will only show rates for carriers that provide the service you selected.
Setting the Default Carrier
You can set the default carrier for the scale. This carrier will automatically be selected each time the scale is turned on.
To set the default carrier
1.Press the Carrier button until the indicator arrow points to the carrier you want.
2.Simultaneously press and 6 (Confirmation). The scale displays INVALID ENTRY.
3.Turn the scale off, and then on again.
The carrier you chose is now selected each time you turn the scale on.
Caring for the Scale
With proper care and handling, your scale will give you years of service. Keep the following in mind when using your scale:
•Your scale works best when operated and stored at normal room temperature. Avoid lengthy exposure to extreme heat or cold.
•Only operate the scale on a stable, vibration free surface.
•Exposure to dust, dirt, moisture, vibration, and air currents; and proximity to other electronic equipment can affect the reliability and accuracy of your scale.
•Using the scale in proximity to wireless devices, such as mobile phones, can cause the scale display to fluctuate when the device is in use.
•Although this scale is designed to be quite durable, gently place items to be weighed on the platform. Avoid rough treatment, as this may permanently damage the internal sensor and void your warranty.
•You can permanently damage the scale by placing significantly overweight items on the scale platform.
•Avoid shaking, dropping, or otherwise shocking the scale. This is a precision instrument and MUST BE HANDLED WITH EXTREME CARE.
•The scale has been calibrated at the factory and will not need to be calibrated again.
Technical Specifications
Capacity
|
20.0 pounds (9 kg)
|
Resolution
|
0.1 oz. (2 g)
|
Units
|
lb./oz. (kg/g)
|
Auto-off
|
After two minutes of inactivity
|
Operating Temperature
|
40° - 104° F (4.5° - 40° C)
|
Interface
|
Serial
|
Power
|
120 V AC adapter or six AAA batteries
|
For information about our other scale products, visit www.dymo.com.
Troubleshooting
Problem/Error Message
|
Solution
|
No display
|
Ensure the scale is plugged in, or replace the batteries.
|
LOW BATT is displayed
|
Replace the AAA batteries.
|
UNDER LOAD is displayed
|
A Tare value was displayed and the items were removed from
|
the scale. Press Tare (0) to reset the scale to zero.
|
|
OVER LOAD is displayed
|
The item on the scale platform exceeds the maximum capacity
|
of the scale. Remove the item immediately to prevent damage
|
|
to the scale.
|
|
Display reads 0.0 with an item on the
|
This can happen because:
|
platform
|
• The Tare button was pressed while an item was on the scale.
|
• Power to the scale was disconnected or turned off and then
|
|
on again with an item on the scale.
|
|
In both of these cases, remove the item from the platform and
|
|
press the Tare (0) button to return the display to 0.0.
|
If you need further assistance, contact Technical Support at (877) 724-8324. You can also obtain support at www.dymo.com.
Warranty
Your DYMO® Scale comes with a warranty against defects in materials, design, or workmanship, for one year from the original date of purchase, when used in accordance with all operating instructions. Normal wear and tear is not covered, nor is excessive use, abuse or damage caused by a user either intentionally or accidentally.
EXCEPT AS PROVIDED HEREIN, DYMO MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, AND DYMO SPECIFICALLY EXCLUDES WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. DYMO’S LIABILITY UNDER THIS WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE SCALE. DYMO SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER OR NOT FORESEEABLE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY TO COUNTRY.
In the event of a product failure, please visit www.dymo.com/support or contact DYMO Technical Support to obtain a Return Material Authorization (RMA) number and further instructions to return your product.
Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
© 2009 Sanford, L.P. All rights reserved. Revised 07/09.
No part of this document or the software may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of Sanford, L.P.
Produced by: DYMO, Stamford, CT
800-426-7827: www.dymo.com © 2009 Sanford, L.P.
To continue the download you need to go through the captcha:
OPERATING INSTRUCTIONS
MODE D’UTILISATION
Zero adjusting knob
Molette de remise a zero
“Memory Lock™” lever
Le levier d`enclenchement
RELEASE “MEMORY LOCK™” LEVER BEFORE weighing on scale or turning zero adjusting knob… Scale is shipped with “Memory Lock™” Lever in locked position (DOWN). Unlock “Memory Lock”™ by moving lever (UP).
DESENSLENCHER LE LEVIER D'ENCLENCHEMENT MEMORIEL AVANT “MEMORY LOCK” d'utiliser la balance pour peser un objet ou avant de tourner la molette de reglage… Lors dé l'expédition, le “Memory Lock” est enclenché (VERS LE BAS). Le désenclencher en déplaçant la molette (VERS LE HAUT).
Technical Service/Returns: 800-638-3722
Customer Service: 800-815-6615
www.Pelouze.com
Pelstar, LLC
Bridgeview, Illinois 60455
All rights reserved
|
35449
|
Pelouze® is a registered trademark of Pelstar, LLC
|
9.02
|
3 YEAR LIMITED WARRANTY
What does the Warranty Cover?
Pelstar LLC scales are warranted from date of purchase against defects of materials or in workmanship for a period of 3 years. If product fails to function properly, return the product, prepaid and properly packed to Pelstar. If manufacturer determines that a defect of material or in workmanship exists, customers' sole remedy will be repair or replacement of scale at no charge. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. All parts including repaired and replaced parts are covered only for the original warranty period.
Who is Covered?
The original purchaser of the product must have proof of purchase to receive warranty service. Pelstar dealers or retail stores selling Pelstar products do not have the right to alter, or modify or any way change the terms and conditions of this warranty.
What is Excluded?
Your warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instruction, abuse including tampering, damage in transit, or unauthorized repair or alternations. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province or jurisdiction to jurisdiction.
To get Warranty Service
Make sure you keep your sales receipt or document showing proof of purchase.
Call 1 (800) 815-6615 to receive a return authorization. Attach proof of purchase to your defective product along with your name, address, daytime telephone number and description of the problem. Carefully package the product and send with shipping and insurance prepaid to:
Pelstar LLC
Attention R/A#________________
Repair Department
7400 W. 100th Place
Bridgeview, IL 60455
If your scale is not covered by warranty, or has been damaged, an estimate of repair costs or replacement costs will be provided to you for approval prior to servicing or replacing.
Made in U.S.A.
A Product of Pelstar, LLC
7400 W. 100th Place
Bridgeview, Illinois 60455
© 2002 Pelstar, LLC All rights reserved. Pelouze® is a registered trademark of Pelstar LLC
Technical Service/Returns: (800) 638-3722
Customer Service: (800) 815-6615
Postal Rate Increase: (888) 807-2253
www.Pelouze.com
GARANTIE LIMITÉE 3 ANS
Qu’est-ce qui est couvert ?
Les balances Pelstar LLC sont garanties pendant 3 ans à partir de la date d’achat contre tout vice de matériaux ou de fabrication. Si le produit est défectueux, veuillez le renvoyer, soigneusement emballé et port payé, à Pelstar. Le fabriquant se réserve le droit de réparer ou de remplacer ce produit ou un composant qui s’avère défectueux durant la période couverte par la garantie. Le remplacement sera effectué par un produit ou composant neuf ou réusiné. Cette garantie est limitée au remplacement du produit, dans le cas où celui-ci n’est plus disponible, par un modèle similaire de valeur égale ou supérieure. Toutes les pièces y compris celles remplacées ou réparées sont couvertes par la garantie initiale dont la durée reste inchangée.
Qui est couvert ?
Cette garantie n’est valable que pour l’acheteur initial et qu’en cas de preuve d’achat valide. Les revendeurs, centres de réparation et points de vente des produits Pelstar n’ont pas le droit de changer ou modifier les termes et conditions de cette garantie.
Qu’est-ce qui est exclu ?
La garantie ne couvre pas les puces ou cadrans devenus obsolètes suite aux changements des tarifs postaux ou à l’usure normale ou aux dommages résultant d’une utilisation incorrecte ou abusive du produit comme suit : utilisation incorrecte du voltage ou courant électrique, utilisation non conforme aux conseils donnés, abus y compris un usage non autorisé, dommages causés dans le transport, ou réparation ou réglage non autorisé. La garantie ne couvre pas non plus les dommages dus aux catastrophes naturelles, telles que les incendies, les inondations, les ouragans et les tornades. Cette garantie vous donne des droits légaux spécifiques et vous pouvez bénéficier d’autres droits qui varient d’état en état et de province en province.
En cas de réparation
Vous devez avoir le ticket de caisse ou la preuve d’achat.
Appelez le 1 (800) 815-6615 (aux États-Unis) pour obtenir un numéro d’autorisation préalable auprès de nos services. Joindre au produit vos nom, adresse, numéro de téléphone et un mot explicatif. Emballer soigneusement le produit et l’envoyer, port payé, en l’assurant contre les risques de dommages ou de perte à l’adresse ci-dessous:
Pelouze Ps20dl Manual
Pelstar LLC
Attn: R/A #_______________
7400 W. 100th Place
Bridgeview, IL 60455 États-Unis
Si le produit n’est pas couvert par la garantie ou s’il a été endommagé, il vous sera fourni un devis préalable pour les frais de réparation ou de remplacement.
Fabriqué aux Etats-Unis
Produit de Pelstar, LLC 7400 W. 100th Place Bridgeview, Illinois 60455
© 2001 Pelstar, LLC Tous droits réservés. Pelouze® est une marque déposée de Pelstar LLC
Download Pelouze User Manuals Ps20dl Manual Free
Service consommateur/réparations: 1-800-638-3722
Service à la clientèle: (800) 815-6615
Augmentation des tarifs postaux: 1-888-807-2253
Download Pelouze User Manuals Ps20dl Manual Instructions
www.Pelouze.com
Audiovox User Manuals
To continue the download you need to go through the captcha: